Used food processing machinery and equipment

Barsso sells used food and meat processing equipment in over 50 countries. We offer you high-quality machinery at competitive prices.

You can have your machine checked or overhauled before delivery. Machines can be bought in one of these 3 conditions:

  • ‘as is’: the machine is sold in the condition it is in
  • ‘in good working order’: the machine has been checked in our workshop, where our skilled staff have examined the machine and have done what was needed to put the machine in good working order again.
  • ‘completely overhauled’: every part of the machine has been stripped, checked and thoroughly rebuilt to the exact standards.

Descriptions like “in good condition”, “in very good condition” or condition: “As New” only refer to the aesthetic of the machines.

  • Schnitzel press “Alco”, Type ASP 400

    adjustable speed

    with outfeed belt

    teaserlink
  • braadlijn 3000-1000

    “GEA-CFS” fryer, Type BRN 3000/1000

    thermic oil heating

    sediment removal system

    teaserlink
  • hete lucht oven 8000-1000

    Hot air oven "GEA-CFS", Type HLT 8000/1000

    suitable for steam injection

    belt washing system

    teaserlink
  • Marinade-Tempura Dipper “Schomaker”, Type SMD 400

    adjustable upper belt

    with turbine above and below

    teaserlink
  • Magurit flaker

    “Magurit” frozen block flaker (shredder), Type 315 Starcutter

    for frozen products

    blocks of max.

    teaserlink
  • Mixing tank “Moretto”, Type M 2500 TA

    contents: approx. 1,750 kg

    vertical mixing screw

    teaserlink
  • “Laska” mixer Z-arms, Type ME 400 ZN

    tiltable mixing drum

    with loader for eurobins

    teaserlink
  • “GEA-CFS” pre-duster, Type PRM 400 MEG

    with air knife

    adjustable speed

    teaserlink
  • “GEA-CFS” breader, Type PR 400

    adjustable speed

    with air knife

    teaserlink
  • Panini autoclaaf

    Autoclave – Retort “Panini”, Type Panini

    circulation pump Calpeda

    heat exchanger

    teaserlink
  • Batter mixer "GEA-CFS", Type MK 70 H

    capacity 70 L

    filling height 860 mm

    teaserlink
  • Batter mixer "GEA-CFS", Type MK 70

    capacity 70 L

    filling height 1.000 mm

    teaserlink
  • Dorit trommelmenger

    “Dorit” Drum mixer 650 L., Type VV - 2 - 300

    max. load 300 kg

    right / left turn

    teaserlink
  • Magurit Starflaker

    “Magurit” frozen block flaker (shredder), Type Starflaker 318

    for frozen products

    3 x 400 V

    teaserlink
  • CES spiraaltransportband

    “CES” spiral conveyor, Model CES-AK-460-cc150-10-UP-L-SH

    nett belt width ± 400 mm

    maximum product height : ± 10

    teaserlink
  • Universal breading line “GEA-CFS”, Type PU 900

    with extra outfeed belt

    with air knives

    teaserlink
  • Alco ASP 900

    Schnitzel press “Alco”, Type ASP 900

    belt width ± 900 mm

    with outfeed belt

    teaserlink
  • Alco pletter

    Schnitzel press "Alco", Type ASP 600

    adjustable speed

    with outfeed belt

    teaserlink
  • Washer for Eurobins 200L "Elpress", Type ENW 20

    built-in pumps

    steam connection 4-5 bar

    teaserlink
  • Bebloemer Gea Cfs

    “GEA - CFS” pre-duster, Type PRM 600 MEG

    with air knives

    outfeed belt

    teaserlink
  • Washing machine for eurocrates "Elpress", Type ENW 800

    20 crates per hour

    filter system

    teaserlink
  • Turn conveyor “GEA-CFS”, Type RT 180-8/1000 L

    stainless steel wire belt

    left hand turn

    teaserlink
  • “Laska” twin shaft mixer 1.500L, Type ME 1500 SPAUX

    twin shaft with ribbon and pad

    pneumatic lid

    teaserlink
  • Spiraalvriezer 500mm

    Spiral Freezer

    spiral belt with 10 tiers

    belt Intralox

    teaserlink
  • Frey Konti A50

    “Frey” vacuum filler, Type KONTI A50

    portioning control

    twister

    teaserlink
  • “Handtmann” vacuum filler, Type VF 100

    twister

    electric control

    teaserlink
  • Hot air oven “GEA-CFS”, Type HLT 14000/1200

    thermal oil heating

    40 kW

    teaserlink
  • Hot air oven “GEA-CFS”, Type HLT 12000/1200

    30 kW

    belt washing system

    teaserlink
  • EasyFry - Fryer “GEA-CFS”, Type EFR 6000/1050-1830

    suitable for thermal oil heati

    infeed conveyor Teflon

    teaserlink
  • Wolfking vleeswolf

    “Wolfking” meat grinder, Type C 250 UNI

    for fresh and tempered meat

    all stainless steel screw

    teaserlink
  • Koelband 4 laags

    “GEA-CFS” cooling tunnel, Type KT-5S 5200/1035, 4 tiers

    cools with ambient temperature

    dripping plate

    teaserlink
  • Fam Centris 315

    Centris 315 "FAM" Slices and Shreds cutter

    perfect cut quality

    1 tool case

    teaserlink
  • Reco spiraalvriezer

    “Reco” Spiral Freezer

    spiral belt stainless steel wi

    belt length : ± 80 m

    teaserlink
  • Glass menger

    “Glass” vacuum mixer / tumbler 300 L., Type VSM 300

    tiltable drum

    with vacuum pump

    teaserlink
  • Gea Cfs multiformer

    “GEA-CFS” former MultiFormer, Type MLF 400

    with “bridge breaker”

    PLC control

    teaserlink
  • “GEA-CFS” steam tunnel Type ST 5000-600

    “GEA-CFS” steam tunnel Type ST 5000-600

    cooking length 5.000 mm

    belt width 600 mm

    teaserlink
  • Terlet procesketel

    Processing vessels “Terlet”

    steam heated

    heat exchanger

    teaserlink
  • Hot air oven “Stork”, Type THS 1200 / 6000

    electrically heated

    total power 250 kW

    teaserlink
  • dubbele lintmenger Palmia

    "Palmia" double spiral mixer, Type DB 600

    turns forward and backward

    2 discharge guards

    teaserlink
  • poedermenger

    “Preci”Powder mixer 800L., Type 503

    variable speed

    security cage

    teaserlink
  • Linde stikstoftunnel

    "Linde" nitrogen tunnel, Type L8-150

    refrigerant : liquid nitrogen

    adjustable temperature

    teaserlink
  • “GEA-CFS” fryer, Type BRN 5000/700

    electrically heated

    sediment removal system

    teaserlink
  • Wolfking

    “Wolfking” Frozen meat grinder, Type C 400 UNI

    fresh and frozen meat: 0°C to

    90 kW

    teaserlink
  • Stork hete lucht tunnel

    Hot air oven “Stork”, Type THS 630/6000

    suitable for thermic oil heati

    canopy with electric hoists

    teaserlink
  • “GEA-CFS” Rotofilter, Type RTF 100

    capacity max. ± 20L/ min.

    rotating filter

    teaserlink
  • Invoerband 1600-700

    Conveyor belt 1600-700

    adjustable speed

    adjustable in height

    teaserlink
  • “GEA-CFS” former, Type ESF 400 Easyformer

    die width 400 mm

    speed up to ± 30 strokes / min

    teaserlink
  • “GEA-CFS” fryer, Type BRN 3000/500

    teflon infeed belt

    mechanical hoists

    teaserlink
  • Gea grill marker

    Grill marker (bar marker) “GEA-CFS”, Type GRM 622

    2 rolls : top & bottom mar

    adjustable gap height (between

    teaserlink
  • Kersting nagaartunnel

    “Kersting” After Heating Tunnel

    with 2 hoists

    adjustable speed

    teaserlink
  • After Heating Tunnel “Kersting”

    + turn conveyor 90°

    + elevating conveyor belt

    teaserlink
  • Palmia lintmenger

    Cut spiral mixer 800L.“Palmia”, Type SB 800

    1 speed

    right-left turn

    teaserlink
  • meat mixer industrial

    “Wolfking” twin shaft paddle mixer, Type TSM 3250L + loader - industrial meat mixer

    loading: ± 3.250L

    loader for 200L eurobins

    teaserlink
  • lineaire oven Gea

    Linear oven “GEA-CFS”, Type HLT 6000/600

    adjustable speed

    electrically heated

    teaserlink
  • Complete line “Stork - Marel”

    mobile

    all stainless steel

    teaserlink
  • “Stork” pre-duster, Type TFM 400

    mobile

    with air knife

    teaserlink
  • vacuum tumbler “Inject Star” 2.200 L.

    Type ES 2200

    Inject Star Touchpanel

    teaserlink
  • Frey vacuümvuller

    “Frey” vacuum filler, Type Konti T260

    PLC control

    with loader for eurobins

    teaserlink
  • “GEA-CFS” cooling tunnel, 5 tiers

    cools with ambient temperature

    stainless steel mesh wire belt

    teaserlink
  • “GEA-CFS” former, Type ESF 400 Easyformer

    speed up to ± 30 strokes / min

    maximum volume per stroke ± 1

    teaserlink
  • “Alco” pre-duster, Type ABM 400 N

    adjustable speed

    with press roller

    teaserlink
  • Frey F-Line 220

    “Frey” vacuum filler, Type F-Line F220

    suitable for twister

    with loader for eurobins

    teaserlink
  • Cookstar spiraal oven

    CookStar “GEA-CFS” Spiral oven, Type HLS 1000/8/130-257

    tiers : 2 x 4 pcs

    suitable for thermic oil heate

    teaserlink
  • Afogrill “Afoheat”, Type 4500 – 9 BB

    natural gas

    with belt conveyor

    teaserlink
  • Glazer – conveyor "GEA-CFS", Type TG 5500/1000

    adjustable speed

    top and bottom spraying

    teaserlink
  • bebloemer EFL400

    “GEA-CFS” pre-duster, Type EFL 400

    outfeed belt

    with air knife

    teaserlink
  • “Alco” pre-duster, Type ABM 400

    with press roller

    with air knife

    teaserlink
  • Gernal nagaartunnel

    “Gernal” Hot Air Oven - After Heating Tunnel, Type BMT-6200x600

    suitable for thermal oil heati

    maximum water flow: 80L/h

    teaserlink
  • Bebloemer Gea

    “GEA-CFS” pre-duster, Type PRM 400 MEG

    adjustable speed

    with air knife

    teaserlink
  • “GEA-CFS” batter-breader 400 mm

    with air knives

    adjustable speed

    teaserlink
  • Stein Jet Stream

    Jet Stream® linear impingement oven “Stein”, Type JSO-IV-40-22TF

    belt width ± 1.000 mm

    automated clean in place syste

    teaserlink
  • “Gernal” vacuum tumbler 4.000 L.

    control box with PLC control

    with vacuum pump

    teaserlink
  • Batter-breader "Stein"

    belt width 380 mm

    mobile

    teaserlink
  • Vacuum tumbler “Lutetia” 4.000 L, Type 4

    PLC control “Mikster”

    tilting system to discharge

    teaserlink
  • “Frigoscandia” Spiral Freezer, Type Gyrocompact GGM 76-08-20-16 NS

    suitable for ammonia and freon

    spiral belt with 28 tiers

    teaserlink
  • Schnitzel press “Glass”, Type SPR 320

    adjustable speed

    mobile

    teaserlink
  • Batter- and breading line 200 mm “Hollymatic”

    with batter pump

    suitable for standard crumbs

    teaserlink
  • Reco spiraalvriezer

    “Reco” Spiral Freezer

    spiral belt stainless steel wi

    belt Intralox

    teaserlink
  • TS1D Fam

    “FAM” cutter, Type TS1D

    infeed belt ± 1.400 mm

    new control box

    teaserlink
  • Scansteel peddelmenger

    “Scansteel” twin shaft paddle mixer 400 L.

    front discharge

    safety lid

    teaserlink
  • Ball rolling machine “GEA-CFS”, Type UM 600

    meat balls from 6 to ± 80 gr

    adjustable speed

    teaserlink
  • Herbort Mayonaisemachine

    Mayonnaise machine – Homogenizer “Herbort”, Type 159 CV

    mixer with scrapers on the sid

    ingredients tank

    teaserlink
  • Tussenband

    Conveyor belt

    belt width 900 mm

    adjustable height

    teaserlink
  • Inject Star vacuümtumbler

    “Inject Star” vacuum tumbler 2.200 L., Type ES 2200

    with vacuum pump

    with filters

    teaserlink
  • “GEA-CFS” former, Type VM 400 HSE

    speed up to ± 55 strokes / min

    PLC control

    teaserlink
  • fryer “Stork”, Type TBM 400/5000

    teflon infeed

    electrically heated

    teaserlink
  • “Berief” contact cooker, Type Dubra DB 8/600

    continuous teflon belt grill

    product height electrically ad

    teaserlink
  • hamburgerlijn

    Burgerline

    adjustable speed

    600 mm

    teaserlink
  • “Koppens” former, Type VM 400 HD

    maximum volume per stroke ± 1L

    with die

    teaserlink
  • Easyfryer Gea Cfs

    “GEA-CFS” fryer - EasyFry, Type EFR 7000/1050-1775

    circulation pump

    suitable for thermal oil heate

    teaserlink
  • bebloemer EFL400

    “GEA-CFS” pre-duster, Type EFL 400

    adjustable speed

    with air knife

    teaserlink
  • Risco Brevetti vacuumvuller

    “Risco Brevetti” vacuum filler, Type RS303

    suitable for filling, portioni

    with loader for eurobins

    teaserlink
  • opvoervijzel

    Elevating spiral screw - Transport spiral screw

    elevating horizontally or diag

    mobile

    teaserlink
  • opvoervijzel

    Screw Loader “GEA-CFS”

    mobile

    loading height : ± 1.400 mm

    teaserlink
  • “Meyn” breading line

    belt width 1.000 mm

    with air knife

    teaserlink
  • Breader “GEA-CFS”, Type PR 900 SC

    belt width 900 mm

    mobile

    teaserlink
  • universal breading line “GEA-CFS”, Type PU 900

    belt width 900 mm

    mobile

    teaserlink
  • “GEA-CFS” breader, Type PR 600

    adjustable working height

    with air knives

    teaserlink
  • Battering machine and breading line “GEA-CFS” 900 mm

    with air knives

    with batter pump

    teaserlink
  • Cook Quench Chill “Elmec” Pasta-rice-vegetables cooking and cooling line

    tiltable, perforated drum (± 2

    control box

    teaserlink
  • “Turbo Tools” vertical 1-head depositor Type D150P

    Depositor, vertical 1-head, “Turbo Tools”

    with or without particles

    Type D150P

    teaserlink
  • glaceerband Stein

    Glazer and/or steam belt “Stein”

    belt width ± 600 mm

    spraying of steam or water

    teaserlink
  • “Kirpestein” Vibro feeder

    8 exits

    4 silencers

    teaserlink
  • Günther 600L

    “Günther” cooling tumbler double jacket 600L, Type GPA 600K

    new cooling unit

    built-in vacuum pump

    teaserlink
  • Conveyor belt “Gea-Cfs”, Type TK 3200/270

    plastic belt

    adjustable speed

    teaserlink
  • Cookstar spiraal oven

    CookStar “GEA-CFS” Spiral oven, Type HLS 600-12/75-154

    12 tiers

    hygrometer

    teaserlink
  • transportband 2600/1000

    Conveyor belt, Type 2600/1000

    adjustable speed

    belt width : 1.000 mm

    teaserlink
  • Conveyor belt, Type 1700/860

    plastic belt

    adjustable speed

    teaserlink
  • “Berief” teflon-grill Type Dubra

    “Berief” teflon-grill Type Dubra

    nett length 9.000 mm

    nett belt width 1.000 mm

    teaserlink
  • Teflon grill

    “GEA-CFS” Teflon Grill, Type BG 1800/600

    bottom and top grilling

    adjustable speed

    teaserlink
  • “Koppens” contact cooker, Type BG 6000/600

    electrically heated

    adjustable speed

    teaserlink
  • “Berief” contact grill Type Dubra DB 5/600

    “Berief” contact cooker Type Dubra DB 5/600

    nett length 4.200 mm

    total length 6.180 mm

    teaserlink
  • “Berief” teflon-grill Type Dubra K1800/600

    “Berief” teflon-grill Type Dubra K1800/600

    nett length 1.800 mm

    belt width 600 mm

    teaserlink
  • “Koppens” contact cooker Type BG 6000/400

    “Koppens” contact cooker Type BG 6000/400

    nett length 6000 mm

    belt width 400 mm

    teaserlink
  • Easyformer Gea Cfs

    “GEA-CFS” former, Type ESF 400-HD EasyFormer

    with outfeed conveyor (5 mm op

    speed up to ± 50 strokes/min

    teaserlink
  • “GEA-Koppens” spiral freezer Type SVR600-15,50-29

    spiral freezer “GEA-Koppens”, Type SVR600-15,50-50-111

    Model: North -North

    NH3 (ammonia) or Freon

    teaserlink
  • Twin shaft paddle mixer 800 L

    2 mixing directions

    safety lid

    teaserlink
  • Röschermatic

    “Röschermatic” vacuum tumbler

    with safety lid

    with built-in vacuum pump

    teaserlink
  • “GEA-CFS” former, Type VM 400 HSE

    speed up to ± 55 strokes / min

    PLC control (Siemens)

    teaserlink
  • Hot air oven “Stork”, Type THS 630/12000

    electrically heated

    245 kW

    teaserlink
  • Loader for eurobins

    discharging height adjustable

    all stainless steel

    teaserlink
  • “Gernal” fryer, Type FMT-E-MO

    electric lifting unit

    top hold down belt

    teaserlink
  • Gea Cfs mlf 400

    “GEA-CFS” former, Type MLF – VM 400 HSE

    speed up to ± 55 strokes / min

    PLC control (Siemens)

    teaserlink
  • Karl Schnell lift

    Loader for eurobins “Karl Schnell”, Type 603

    for 200L eurobins

    discharging height ± 3.500 mm

    teaserlink
  • Wolfking automatenwolf

    Self-feed grinder “Wolfking”, Type SFG 850/200

    200 mm - head

    9,2 kW

    teaserlink
  • “GEA-CFS” former, Type VM 600 HS

    with outfeed conveyor

    mobile

    teaserlink
  • Automatic filling flow divider
    New

    Automatic filling flow divider

    NEW !

    Capacity: max. 2.500 kg/h

    teaserlink
  • Glazer 1650-900

    belt width ± 900 mm

    nett belt length: ± 1.650 mm

    teaserlink
  • “Barsso” frozen meat flaker (shredder), Type Barflaker 400

    New!

    9,5 kW

    teaserlink
  • “Meyn” pre-duster 900 mm

    adjustable working height

    with outfeed conveyor

    teaserlink
  • Tempura Dipper "Meyn", Type Tempudipper

    with lower and upper belt

    outfeed belt

    teaserlink
  • Gea Cfs PRM 900 MEG

    “GEA - CFS” pre-duster, Type PRM 900 MEG

    adjustable speed

    mobile

    teaserlink
  • Loader for eurobins

    for 200L eurobins

    discharging height is adjustab

    teaserlink
  • “Gernal” vacuum tumbler 2.000 L., Type HBV 120

    control box with waiting, work

    water filter

    teaserlink
  • “Inject Star” vacuum tumbler 1.100 L.

    1,8 kW

    with vacuum pump

    teaserlink
  • Gea Cfs braadlijn

    “GEA-CFS” fryer, Type BR 3000/600

    suitable for thermal oil heate

    sediment removal system

    teaserlink
  • “GEA-CFS” former, Type VM 400-30

    die width 400 mm

    ± 30 strokes / minute

    teaserlink
  • Gea Cfs

    Screw Loader “GEA-CFS”

    mobile

    outfeed height ± 2.700

    teaserlink
  • “GEA-CFS” former, Type VM 400 HSE

    PLC control

    mobile

    teaserlink
  • “GEA-CFS” former MultiFormer, Type MLF 400

    PLC control

    variable speed

    teaserlink
  • “Karl Schnell” twin shaft paddle mixer 3.000L

    “Karl Schnell” twin shaft paddle mixer 3.000L

    temperature reading

    4 load cells

    teaserlink
  • Fryer “GEA-CFS”, Type BRN 7000/1000-702

    Max 700 kW

    adjustable speed

    teaserlink
  • “GEA-CFS” fryer, Type BRN 3000/500

    teflon-infeed

    electrical hoists

    teaserlink
  • “GEA - CFS” pre-duster, Type PRM 900 MEG

    adjustable speed

    with air knives

    teaserlink
  • krokettenroller

    Croquetten rolling machine “GEA - CFS”, Type CRQ 400

    adjustable in height

    adjustable speed

    teaserlink
  • Pre-duster “GEA-CFS”, Type PRM 600 M (EcoFlour)

    “GEA-CFS” pre-duster, Type PRM 600 M (EcoFlour)

    mobile

    adjustable speed

    teaserlink
  • Cooker “Gernal”

    suitable for 1 trolley

    steam heated

    teaserlink
  • “Wolfking” mixer-grinder Type TSMIG 1250/200

    mixer 1250L.

    200 mm – head

    teaserlink
  • “Frigoscandia” Spiral Freezer, Type GCM10/3+1-08-30-27+9-NW-CR

    Model: North - East

    30 tiers

    teaserlink
  • “GEA-CFS” former, Type VM 400 HS

    die width 400 mm

    ± 50 strokes / min.

    teaserlink
  • Marel MasterFill MasterSlice

    Part of Cordon Bleu line Marel

    “Marel” Masterfill

    MasterSlice “Marel”

    teaserlink
  • battering machine “GEA-CFS”, Type ER 900

    belt width 900 mm

    mobile

    teaserlink
  • Turn conveyor 90°, 800 mm

    plastic belt with

    belt width 800 mm

    teaserlink
  • pre-duster “GEA-CFS”, Type PRM 400 M

    with air knife

    with outfeed conveyor

    teaserlink
  • “GEA-CFS” fryer, Type BRN 6000/1000

    with top hold down belt

    mechanical hoists

    teaserlink
  • “Barsso” vacuum tumbler, Type 5 Bartumb
    New

    “Barsso” vacuum tumbler, Type 5 Bartumb

    New!

    max. load : ± 500 kg

    teaserlink
  • Hot air oven “Stork”, Type THS 630/12000

    new control box

    245 kW

    teaserlink
  • Rotary table (lazy Susan)

    new !

    diameter 1.250 mm

    teaserlink
  • “Meyn” fryer, 3000-600

    top hold down belt

    electrically heated

    teaserlink
  • breading line “GEA-CFS”, Type PR 400

    width 400 mm

    mobile

    teaserlink
  • loader for eurobins “Stork”, Type THK

    all stainless steel

    adjustable height

    teaserlink
  • Fryer “Heat and Control”

    frying length 12.000 mm

    belt width 1.200 mm

    teaserlink
  • “Wanson” thermic (oil) fluid heater

    “Wanson” thermic (oil) fluid heater

    400V

    2500W

    teaserlink
  • “KAAK” Twin spiraalvriezer

    “KAAK” Twin Spiral Freezer

    number of tiers per drum 21

    product height 125 mm

    teaserlink
  • Brine Injector “Belam Wolfking”, Type MI-650 Multi Injector

    150 needles

    belt width ± 650 mm

    teaserlink
  • thermic oil installation "Wanson", Type 300LN

    gas burner

    with pump

    teaserlink
  • Brine Injector “Townsend”

    Model 1450

    filter unit

    teaserlink
  • fryer “GEA-CFS”, Type BRN 4500/700

    mechanical hoists

    sediment removal system

    teaserlink
  • fryer “GEA-CFS”, Type BR 4000/400

    thermal oil heated

    with mechanical hoists

    teaserlink
  • Turn conveyor

    180°

    right hand turn

    teaserlink
  • Crumb Feeder “Koppens”, Type PD200

    with hopper of 200 kg

    mobile

    teaserlink
  • 1-head diaphragm “Stork” Type TSM 150

    1-head diaphragm “Stork” Type TSM 150

    with hopper

    height adjustable

    teaserlink
  • “Meyn” breader, Type MB 600

    “Meyn” breader, Type MB 600

    mobile

    belt width 600 mm

    teaserlink
  • "Siemens" vacuum station

    "Siemens" vacuum station

    2 vacuum pumps "Siemens&q

    buffer tank

    teaserlink
  • Bag sealer for melted cheese

    Bag sealer for melted cheese

    Make: Collard-Pelisson

    with 3 moulds of 40 x 40 x 19

    teaserlink
  • “van de Vecht” IQF Freezer

    “van de Vecht” IQF Freezer

    capacity : max. ± 1500 kg/h.

    NH3 (ammonia)

    teaserlink
  • Cooling tunnel

    Cooling tunnel

    nett belt length 2 x 5.500 mm

    nett belt width ± 900 mm

    teaserlink
  • Depositor "Tromp" Type : 180.02.076

    Depositor "Tromp"

    passage Max. 15 mm

    cylinder max. 500 cc

    teaserlink
  • Depositor "Tromp" Type : 180.02.076

    Depositor "Tromp" Type : 180.02.076

    2-head-outfeed for baguettes

    cylinder max. 500 cc

    teaserlink
  • Vertical 2-head depositor “DECA” Type D102P

    Vertical 2-head depositor “DECA” Type D102P

    with 2 fall-down head

    mobile

    teaserlink
  • Grignoteuse (flaker / shredder) pour des pains de produit congelé “Barsso” Type Barflaker 200

    “Barsso” frozen blocks flaker (shredder) Type Barflaker 200

    NEW!

    capacity : ± 1500 kg / h

    teaserlink
  • Vacuum emulsifier “Inotec”

    Type I-225CDVM/132

    169 kW

    teaserlink
  • 1-head diaphragm “Meyn” Type FM2A

    1-head diaphragm “Meyn”

    Type FM2A

    adjustable speed

    teaserlink
  • “Formcook” contact cooker – Combi oven

    “Formcook” contact cooker – Combi oven, thermic oil

    belt width 1.100 mm

    nett length 11.000 mm

    teaserlink
  • “Formcook” contact cooker – Combi oven

    “Formcook” contact cooker – Combi oven, electrically

    belt width 1.000 mm

    nett length 4.750 mm

    teaserlink
  • “Gernal” vacuum tumbler 3.000 L.

    “Gernal” vacuum tumbler 3.000 L.

    control box with PLC control

    loading up to ± 1.500 kg

    teaserlink
  • “Stork” breader Type TPM 630

    “Stork” breader Type TPM 630

    with new control box

    All new cables

    teaserlink
  • “Berief” drum blancher Type  Jumbo KODUKO 16/500

    “Berief” drum blancher

    nett length ± 11 m

    with elevating spiral screw fo

    teaserlink
  • Conveyor belt 2600-440

    belt width ± 440 mm

    belt length ± 2.600 mm

    teaserlink
  • “Wolfking” vacuum mixer, Type TSMV 3250

    twin shaft paddle mixer

    ± 30 kW

    teaserlink
  • Overhead Weigh Bridge “Linco” / Puente de pesaje aéreo “Linco” – Modelo 180°

    Overhead Weigh Bridge “Linco” / Puente de pesaje aéreo “Linco” – Modelo 180°

    Brand New

    still in shipping crate

    teaserlink
  • Turn conveyor 90°, 800mm

    belt width 800 mm

    right hand turn

    teaserlink
  • “Barsso” vacuum tumbler 300L Type Bartumb

    “Barsso” vacuum tumbler 300L Type Bartumb

    NEW !

    max. load : ± 200 kg

    teaserlink
  • Brine mixer
    New

    Brine mixer

    NEW !

    400 L capacity

    teaserlink
  • "Barsso" twin shaft paddle mixer 450 L Type Barmix 450

    "Barsso" twin shaft paddle mixer 450 L Type Barmix 450

    new !

    2 speeds

    teaserlink
  • Water pump ‘’Calpeda’’

    Water pump ‘’Calpeda’’

    Q: 55 m³/h.

    3 x 380 V

    teaserlink
  • "Barsso" paddle mixer 200 L Type Barmix 200

    "Barsso" paddle mixer 200 L Type Barmix 200

    new !

    2 mixing directions

    teaserlink
  • “Barsso” twin shaft paddle mixer 900 L Type Barmix 900

    “Barsso” twin shaft paddle mixer 900 L Type Barmix 900

    new !

    2 speeds (20 and 40 rpm)

    teaserlink
  • Mixing tank

    Mixing tank

    capacity ± 2.200 L

    with mixer

    teaserlink
  • Turn conveyor 90° “Koppens”  Type RT 90 – 8 / 900L

    Turn conveyor 90° “Koppens” Type RT 90 – 8 / 900L

    mesh wire belt

    left hand turn

    teaserlink
  • “Holmatec” shuttle conveyor

    “Holmatec” shuttle conveyor

    belt width 1.050 mm

    Retractable Length 500 mm

    teaserlink
  • Sold

    Tempura Dipper “Schomaker”, Type SMD 400

    mesh width : 5 mm

    with lower and upper belt

    teaserlink
  • nagaartunnel 5 laags
    Sold

    After Heating Tunnel 5 tiers “Wittkamp”

    suitable for steam heating

    infeed and outfeed conveyor

    teaserlink
  • bocht 850mm
    Sold

    Turn conveyor 90°

    right hand turn

    belt width 850 mm

    teaserlink
  • Sold

    “GEA-CFS” batter-breader, Type WTC 600 - PR 600

    with air knives

    with batter pump

    teaserlink
  • Gea PU 600
    Sold

    Universal breading line “GEA-CFS”, Type PU 600

    with extra outfeed belt

    with air knives

    teaserlink
  • Sold

    Universal breading line “GEA-CFS”, Type PU 600

    with extra outfeed belt

    with air knives

    teaserlink
  • WW 200 winkelwolf
    Sold

    Self-feed grinder "GEA-CFS”, Type WW 200

    with tool trolley

    Loader for eurobins

    teaserlink
  • “Acfri” cooling tunnel
    Sold

    “Acfri” cooling tunnel

    nett belt length 14.000 mm

    nett belt width 2.200 mm

    teaserlink
  • eiwiteer - paneerlijn Gea
    Sold

    Batter- and breading line 400 mm “GEA-CFS”, Type ER - PR 400

    with air knives

    adjustable speed

    teaserlink
  • Sold

    “Baader” separator, Type 601

    drum : 3 mm

    capacity up to ± 1.000 kg / h

    teaserlink
  • Gernal procesketel
    Sold

    Process vessel “Gernal” 500L with stirring system, Type MBK 500-S-PLC

    suitable for steam heating

    tiltable drum

    teaserlink
  • Sold

    Elevating conveyor belt 2300-400

    belt width ± 400 mm

    outfeed height ± 2.300 mm

    teaserlink
  • Conveyor belt  1.100-900
    Sold

    Conveyor belt 1.100-900

    belt width 900 mm

    belt length 1.100 mm

    teaserlink
  • afraai-unit frikandellen
    Sold

    Double twister unit for sausages (without casing)

    suitable to put on top of a co

    suitable for vacuum filler

    teaserlink
  • Gea Cfs eiwiteer- paneerlijn
    Sold

    “GEA-CFS” Batter- and breading line 200 mm

    with air knife

    with press roller

    teaserlink
  • Frey Jobber
    Sold

    “Frey” vacuum filler, Type JOBBER

    50 L. hopper

    with twister

    teaserlink
  • Stork THS 1000-6000
    Sold

    Hot air tunnel “Stork” Type THS 1000/6000

    nett belt length 6.000 mm

    nett belt width 1.000 mm

    teaserlink
  • Cookstar Spiral oven
    Sold

    “GEA-CFS” Spiral oven “Cookstar”, Type HLS 600/10/100-175

    belt length: ± 73 m

    10 tiers

    teaserlink
  • TST Techniek oven
    Sold

    Super hot air steam cooker “TST Techniek - Provisur”, Type SHASC 8000/600

    with belt wash system

    PLC control

    teaserlink
  • Sold

    Comitrol Processor “Urschel”, Model 1700

    30hp

    mobile

    teaserlink
  • Fam
    Sold

    “FAM” strip cutter - dicer, Type CMD-3D

    capacity : from 1.600 to 3.000

    for rectangular, square or cyl

    teaserlink
  • Wolfking
    Sold

    “Wolfking” mixer-grinder, Type TSMG 1500/250

    twin shaft paddle mixer

    loading height : 2.300 mm

    teaserlink
  • Sold

    Autoclave - Retort “Steritech”, Type Steritech ST5-AST-AEH-PMG

    suitable for 5 trolleys

    with heat exchanger

    teaserlink
  • Sold

    Emulsifier “Stephan” microcutter Type MCH 20

    knife 0,35 mm

    mobile

    teaserlink
  • Sold

    “GEA-CFS” former MultiFormer, Type MLF – VM 600 HSE

    PLC control

    with outfeed conveyor

    teaserlink
  • Sold

    “Meyn” pre-duster, Type MP 1000

    adjustable working height

    with air knife

    teaserlink
  • invoerband Gea Cfs
    Sold

    Conveyor belt “Gea-Cfs”, Type TG 800/600

    belt width 600 mm

    mesh wire belt 5 mm

    teaserlink
  • Sold

    “Glass” vacuum mixer / tumbler 1500 L., Type VSM 1500

    electrically tiltable

    programmable

    teaserlink
  • Sold

    “Stork” batter-breader 250 mm, Type TEM-TPM 250

    with press roller

    with air knives

    teaserlink
  • Sold

    Conveyor belt, 1200-1100

    plastic belt

    1 speed

    teaserlink
  • Barflaker 200
    Sold

    “Barsso” frozen blocks flaker (shredder), Type Barflaker 200

    capacity : ± 1500 kg / h

    for blocks of max.

    teaserlink
  • dipper
    Sold

    Tempura Dipper “SCHOMAKER”

    with lower and upper belt

    adjustable speed

    teaserlink
  • granulaat transportsysteem
    Sold

    Granulate suction conveying station “Motan”, Type Metro HBS 400

    as new

    year of construction 2017

    teaserlink
  • Sold

    Mobile ergonomic loader for eurobins

    all stainless steel

    mobile

    teaserlink
  • Sold

    drum mixer

    suitable for bami, nasi and sp

    right-left turn

    teaserlink
  • Tempura Dipper TD600
    Sold

    Tempura Dipper “GEA-CFS”, Type Tempudipper TD 600

    adjustable upper belt

    with air knife

    teaserlink
  • Sold

    Glazer 2000-900

    belt width ± 900 mm

    belt length: : ± 2.000 mm

    teaserlink
  • Sold

    Complete line 400mm “CFS – GEA” for Tempura products

    400 mm

    Tempura products

    teaserlink
  • nuggetlijn
    Sold

    Complete line 400mm “CFS – GEA” for nuggets

    PLC control

    adjustable speed

    teaserlink
  • Sold

    Tempura Dipper “GEA-CFS” Type Tempudipper TD 400

    belt width 400 mm

    with lower and upper belt

    teaserlink
  • Sold

    “Stork” battering machine, Type TEM 630

    belt width 630 mm

    mobile

    teaserlink
  • Sold

    “BOC – APV - CES” nitrogen tunnel

    belt width ± 1.200 mm

    belt length ± 8.500 mm

    teaserlink
  • Sold

    “Henneken” vacuum cooling tumbler 3.000 L., Type B6 – 3000L

    control box with PLC control

    built-in vacuum pump Büsch

    teaserlink
  • batterfilter
    Sold

    Batterfilter "GEA-CFS", Type BTF 100

    TopLobe pump

    3x400V, 50Hz, 0,09kW

    teaserlink
  • battering machine
    Sold

    battering machine “GEA-CFS”, Type WetCoater 1000

    belt width 1.000 mm

    with batter pump (HD)

    teaserlink
  • Sold

    “Sealpac” Traysealer for prefab trays

    Type 800plus

    With 6 shapes

    teaserlink
  • Sold

    “Wolfking” twin shaft paddle mixer Type TSM 3250 L

    2 motors

    PLC control "Siemens"

    teaserlink
  • “Boldt” twin shaft ribbon mixer  Type BM6000S52R
    Sold

    “Boldt” twin shaft ribbon mixer

    suitable for steam heating

    with new control box

    teaserlink
  • Sold

    cooking-blanching line, 6m “Kiremko”

    diameter 1.400 mm

    screw blancher

    teaserlink
  • Berief
    Sold

    Process vessel "Berief" with stirring system, Type Kippko

    steam heated

    double jacket

    teaserlink
  • Grill “Afoheat” Type Afogrill
    Sold

    Grill + Grill marker (bar marker) “Afoheat”

    Type Afogrill

    Type Afogrillmarker

    teaserlink
  • Sold

    Brine Injector “Inject Star”

    belt width ± 360 mm

    88 needles

    teaserlink
  • Sold

    nitrogen tunnel “Packo”

    belt width ± 650 mm

    belt length ± 7.000 mm

    teaserlink
  • Risco dubbele peddelmenger
    Sold

    “Risco Brevetti” twin shaft paddle mixer 450 L., Type RS 450

    front discharge

    + loader for eurobins

    teaserlink
  • Sold

    Complete line 400mm “CFS – GEA”

    width 400 mm

    teaserlink
  • Sold

    Slicer “Treif”, Type DIVIDER 660 PLUS

    with 3 teflon-knives

    max.

    teaserlink
  • Maja Ijsschilfermachine
    Sold

    Flake-ice machine "Maja", Type SA 3000 L

    capacity : 3.000 kg / 24 h

    installed on a stainless stee

    teaserlink
  • “Glass” vacuum mixer / tumbler 150 L. Type VSM 150
    Sold

    “Glass” vacuum mixer / tumbler 150 L. Type VSM 150

    with tumbling and mixing arm

    tiltable drum

    teaserlink
  • Sold

    "GEA-CFS" vacuum mixer, Type UniMix V 1500

    twin shaft paddle mixer

    2 front discharge guards

    teaserlink
  • Sold

    “Gernal” Cooker - electrically heated

    Suitable for 1 trolley

    shower

    teaserlink
  • Kramer + Grebe
    Sold

    “Kramer + Grebe” twin shaft mixer 750 L, Type MM 750, MultiMix

    ribbon and paddles

    right-left turn

    teaserlink
  • Sold

    pre-duster “Alco”, Type ABM 600 N

    mobile

    belt width 600 mm

    teaserlink
  • mobile blowing unit
    Sold

    Mobile blowing unit

    mobile

    Busch blowing pump

    teaserlink
  • Sold

    Vibro feeder

    nett width 750 mm

    2 vibrating motors

    teaserlink
  • Sold

    “Dorit – VARIO-VAC” tumbler 4.200 L., Type VV-7-2001

    with control box with waiting,

    with new vacuum pump

    teaserlink
  • Baader separator
    Sold

    “Baader” separator, type 697

    drum : 3 mm

    capacity up to ± 1000 kg / h

    teaserlink
  • Sold

    “Wolfking” twin shaft paddle mixer, Type TSM 1750L

    programmable

    mixer capacity: ± 2.000L

    teaserlink
  • grill marker Gea Cfs
    Sold

    Grill marker “GEA-CFS”, Type GR 746-72

    electrically heated

    adjustable speed

    teaserlink
  • Risco RS505
    Sold

    “Risco” vacuum filler, Type RS505

    suitable for a twister

    PLC control

    teaserlink
  • Sold

    “Scansteel” twin shaft mixer 400 L

    twin shaft with ribbon and pad

    double jacket

    teaserlink
  • Barmix 450L
    Sold

    "Barsso" twin shaft paddle mixer 450 L, Type Barmix 450

    inspection gantry

    + Loader for eurobins

    teaserlink
  • hete lucht tunnel
    Sold

    Hot air oven “GEA-CFS”, Type HLT 10000/600-29

    suitable for thermic oil heati

    heating separately adjustable

    teaserlink
  • Sold

    Hot water heater (boiler)

    temperature display

    capacity 800 L.

    teaserlink
  • Sold

    Cheese grater “Groba”, Type KKR-500

    with 10 graters

    mobile

    teaserlink
  • Ilpra schalensluitmachine
    Sold

    “Ilpra” top sealer for prefab trays, Type FP Linear N

    with mould for 2 trays of 230

    with infeed conveyor for trays

    teaserlink
  • Sold

    Vacuum Mixer “Glass” 600 L.

    with loader

    Type VSM 600

    teaserlink
  • Sold

    Emulsifier "Stephan" microcutter Type MC 15

    1 speed

    11 kW

    teaserlink
  • Stephan microcutter
    Sold

    Emulsifier "Stephan", microcutter Type MC 10

    Knife: 0,35 mm

    1 speed (3.000 tpm)

    teaserlink
  • Sold

    “Laska” twin shaft paddle mixer 500 L,Type ME 500 PNA1

    PLC control

    yoc 2005

    teaserlink
  • DSI plaatvriezer
    Sold

    Vertical plate freezer “DSI”, Type V4 38/75 B

    NH3 (ammonia) or R22/R717 (fre

    + hydraulic pump

    teaserlink
  • “Koppens” Crumb Feeder Type PD200
    Sold

    “Koppens” Crumb Feeder

    direct feeding onto breadcrumb

    with hopper of 200 kg

    teaserlink
  • Gea Cfs stoomtunnel
    Sold

    “GEA-CFS” steam tunnel, Type ST 10000-600

    temperature distribution in 2

    adjustable speed

    teaserlink
  • Sold

    Automatic Double Clipper “Tipper Tie Technopack”

    Type KDCV-A 400

    6 Bar

    teaserlink
  • Sold

    “Handtmann” vacuum filler, Type VF 50

    portionning control

    twister

    teaserlink
  • Sold

    Line for Croquetten

    vacuum filler + twister unit

    breader

    teaserlink
  • Sold

    ribbon mixer 15.000L

    elevating spiral screw

    discharge screw

    teaserlink
  • Sold

    Product pump “Karl Schnell”

    Type 642

    with Sine pump “Maso”

    teaserlink
  • Formcook
    Sold

    Contact Cooker – combi oven “Formcook”, Type combi

    continuous teflon belt grill

    electrically heated

    teaserlink
  • Double jacket mixing tank
    Sold

    Double jacket mixing tank

    capacity 450 L

    with mixer

    teaserlink
  • Sold

    battering machine - Breading machine “GEA-CFS”, Type WetCoater 1000 - CrumbMaster 1000

    belt width 1.000 mm

    mobile

    teaserlink
  • Seydelmann vacuummenger
    Sold

    “Seydelmann” vacuum mixer, Type PV 1000

    suitable for cooling

    inspection gantry

    teaserlink
  • Stephan
    Sold

    Emulsifier “Stephan”, microcutter Type MCH 15

    in line cutter

    mobile

    teaserlink
  • Sold

    “Barsso” frozen meat flaker (shredder) Type Barflaker 400

    9,5 kW

    capacity : ± 2.500 kg / h

    teaserlink
  • Wolfking
    Sold

    "Wolfking" frozen meat grinder, Type C 300 FBG

    300 mm head

    right / left turn

    teaserlink
  • Sold

    “GEA-CFS” former Type VM 400 HSE

    PLC control

    die width 400 mm

    teaserlink
  • Sold

    “Frey” vacuum filler + Automatic Double Clipper “Tipper Tie Technopack”

    Type F-Line F222

    Type KDCV-A 400

    teaserlink
  • Sold

    “Frey” vacuum filler, Type F-Line F222

    plc control

    with loader

    teaserlink
  • Sold

    “GEA-CFS” former, Type MLF - VM 400 HSE

    ± 55 strokes / min.

    plc controlled (CFS-Siemens)

    teaserlink
  • Fryer "Florigo" Type BAS/ZF 880-P
    Sold

    Fryer "Florigo"

    nett belt width 1.200 mm

    nett belt length 7.300 mm

    teaserlink
  • batter mixer
    Sold

    Batter mixer “Koppens”, Type MK 70

    mobile

    capacity 70 L

    teaserlink
  • Battering - Breading machine Type ER-PRC 600
    Sold

    Battering - Breading machine Type ER-PRC 600

    belt width 600 mm

    mobile

    teaserlink
  • Sold

    Grill marker (bar marker) “GEA-CFS” Type GR 622

    belt width 600 mm

    top & bottom marking

    teaserlink
  • Sold

    Shredder - coarse cutter “Smicon”

    Type SMIDE4

    4 kW

    teaserlink
  • Sold

    cooking line

    cooking length 4.500 mm

    belt width 900 mm

    teaserlink
  • Sold

    vacuum mixer “Wolfking” , Type TSMV 850L

    double paddle mixer

    suitable for cooling

    teaserlink
  • Sold

    vacuum tumbler 3.000 L. “Henneken”, Type B6 – 3000L

    adjustable speed

    Büsch vacuüm pump

    teaserlink
  • Sold

    “Nilma” fryer, Type Frymatic

    frying length 2.300 mm

    belt width 450 mm

    teaserlink
  • Sold

    Turn conveyor 90°, 400mm

    mesh wire belt

    left hand turn

    teaserlink
  • Sold

    Emulsifier “Karl Schnell”, microcutter, Type 049F150

    Hopper: ± 50L

    capacity up to 1.000 kg/h

    teaserlink
  • Sold

    Ball rolling machine “GEA-CFS”, Type BRU 600

    belt width ± 600 mm

    mobile

    teaserlink
  • Sold

    “Frigoscandia” Cooling- / freezing tunnel

    nett cooling length 6.000 mm

    nett belt width 1.050 mm

    teaserlink
  • Sold

    Bandsaw “Mainca”, Type BM-3000JV

    sliding table

    2,22 kW

    teaserlink
  • “Cryostar” Spiral Freezer
    Sold

    “Cryostar” Spiral Freezer

    9 tiers

    belt width ± 500 mm

    teaserlink
  • Sold

    DiversaCut Sprint dicer "Urschel"

    Elevating conveyor belt

    water circulation pump

    teaserlink
  • Sold

    mixer Z-arms “Laska”, Type ME 400 ZN

    7,5 kW

    loader for eurobins

    teaserlink
  • Sold

    CookStar “GEA-CFS” Spiral oven, Type HLS 600/8/130-305

    thermic oil heated

    nett belt width ± 600 mm

    teaserlink
  • Sold

    “GEA-CFS” former, Type ESF 400

    ± 30 strokes / minute

    EasyFormer

    teaserlink
  • Sold

    “GEA-CFS” former MultiFormer Type MLF - VM 600 HSE

    belt width 600 mm

    mobile

    teaserlink
  • “Wolfking” meat grinder Type C 250 UNI
    Sold

    “Wolfking” meat grinder Type C 250 UNI

    250 mm head

    ± 45 kW

    teaserlink
  • “GEA-CFS” fryer Type BR 3000/600
    Sold

    “GEA-CFS” fryer Type BR 3000/600

    electrically heated

    110 kW

    teaserlink
  • Sold

    EasyFry “GEA-CFS”, Type 5000/650 (E) - 1754

    304 kW

    electrically heated

    teaserlink
  • Sold

    cooking-blanching line, 4m “Kiremko”

    diameter 1.200 mm

    screw blancher

    teaserlink
  • Sold

    Laska vacuum mixer

    1000L

    with loader

    teaserlink
  • Sold

    Glaser – conveyor "GEA-CFS"

    belt width ± 1000 mm

    nett belt length: 5.500 mm

    teaserlink
  • Sold

    Battering-Breading line “GEA-CFS”, Type ER600-PR600C

    belt width 600 mm

    mobile

    teaserlink
  • Sold

    Portion cutter “Treif”

    Type Lion CE

    cuts: 200 pc/min

    teaserlink
  • Sold

    Shredder “FAM”, Type CHS-2D

    max. diameter 90 mm

    cheese and meat applications.

    teaserlink
  • battering - breading line "GEA-CFS", type ER-PR900
    Sold

    battering - breading line "GEA-CFS", type ER-PR900

    belt width 900 mm

    mobile

    teaserlink
  • Grill marker “Koppens” Type : GR722-11
    Sold

    Grill marker “Koppens” Type : GR722-11

    belt width 600 mm

    electrically heated

    teaserlink
  • Sold

    Cutter “K+G Wetter” 200L, Model 410 STL

    emptier

    yoc 2007

    teaserlink
  • “Multivac” Thermoformer Type R330
    Sold

    “Multivac” Thermoformer Type R330

    + labeller

    + printer

    teaserlink
  • Sold

    Self-feed grinder “K+G Wetter”, Type 417

    130 mm - head

    hopper ± 250 L.

    teaserlink
  • “Cryovac” shrink tunnel Model CJ 51 LH-T
    Sold

    “Cryovac” shrink tunnel

    Model CJ 51 LH-T

    electrically heated 15 kW

    teaserlink
  • “Berief” teflon-grill
    Sold

    “Berief” teflon-grill, Type Dubra DB 1/600

    + belt washing system

    belt width ± 650 mm

    teaserlink
  • Mixer 50 L. “Debotec”
    Sold

    Mixer 50 L. “Debotec”

    New !

    tiltable drum

    teaserlink
  • Sold

    “Loma Systems” metal detector

    gap height max. 70 mm

    gap width 250 mm

    teaserlink
  • “Formcook” contact cooker – Combi oven Model combi 6250507 EF
    Sold

    “Formcook” contact cooker – Combi oven Model combi 6250507 EF

    electrically heated

    belt washing system

    teaserlink
  • “Terlet” process vessel
    Sold

    “Terlet” process vessel

    100 litres capacity

    suitable for steam heated

    teaserlink
  • Mayonnaise machine - Homogenizer
    Sold

    Mayonnaise machine - Homogenizer

    vacuum

    mayonnaises and dressings

    teaserlink
  • Mixer 100 L. “Debotec”
    Sold

    Mixer 100 L. “Debotec”

    100L

    tiltable drum

    teaserlink
  • Slaughterline for ostrich
    Sold

    Slaughterline for ostrich

    Capacity: up to 20 ostrich / h

    teaserlink
  • “Koppens” tempura dipper Type TD 900
    Sold

    “Koppens” tempura dipper Type TD 900

    belt width 900 mm

    top hold down belt

    teaserlink
  • Meat grinder “Seydelmann”, Type AU 200-B
    Sold

    Meat grinder “Seydelmann”, Type AU 200-B

    with tool trolley

    + Loader for eurobins

    teaserlink
  • Mixer 150 L. “Debotec”
    Sold

    Mixer 150 L. “Debotec”

    New !

    tiltable drum

    teaserlink
  • Sold

    Mixer for 200L eurobins

    adjustable mixing time

    1 speed

    teaserlink
  • Sold

    “GEA-CFS” OptiFlour Type OPF 1000

    pre-duster

    belt width 1.000 mm

    teaserlink
  • Bebloemer “GEA - CFS” Type PRM 600 MEG
    Sold

    “GEA - CFS” pre-duster Type PRM 600 MEG

    belt width 600 mm

    All new motors

    teaserlink
  • Sold

    “Glass” vacuum mixer / tumbler 600 L., Type VSM 600

    with mixing arm and scraper

    2,95 kW

    teaserlink
  • “GEA-CFS” steam tunnel Type ST 6000-600
    Sold

    “GEA-CFS” steam tunnel Type ST 6000-600

    belt width 600 mm

    cooking length 5.000 mm

    teaserlink
  • Disperger “Limitech” ± 200kg
    Sold

    Disperger “Limitech” ± 500L

    ± 500L

    vacuum

    teaserlink
  • “Palmia” twin shaft ribbon mixer 2.000 L.
    Sold

    “Palmia” twin shaft ribbon mixer 2.000 L.

    with new control box

    new cables

    teaserlink
  • “Laska” mixer Z-arms, Type ME 500 ZNA1
    Sold

    “Laska” mixer Z-arms, Type ME 500 ZNA1

    PLC control

    yoc 2008

    teaserlink
  • Sold

    Vertical plate freezers “GRAM”

    with 50 stations

    thickness blocks ± 85 mm

    teaserlink
  • Line for primal cutting “Linco”
    Sold

    Line for primal cutting “Linco”

    ± 2000 – 3000 chicken/h

    For chickens of 800 till 2000

    teaserlink
  • “Koppens” teflon-grill Type BG 1800/600
    Sold

    “Koppens” teflon-grill Type BG 1800/600

    nett length 1800 mm

    belt width 600 mm

    teaserlink
  • Heller “Messer” coating tumbler
    Sold

    Heller “Messer” coating tumbler

    with entry and exit

    1.500 L. tumbler

    teaserlink
  • Hot air oven “GEA-CFS” Type HLT 8000/600
    Sold

    Hot air oven “GEA-CFS” Type HLT 8000/600

    belt width 600 mm

    total length ± 8.500 mm

    teaserlink
  • Hot air oven “Stein” Type FMC Stein JSOIII 4022 DG
    Sold

    Hot air oven “Stein”

    Type FMC Stein JSOIII 4022 DG

    Direct gas oven

    teaserlink
  • “Stork” Spiral oven  Type TSO 600 / 96 / 4TH
    Sold

    “Stork” Spiral oven Type TSO 600 / 96 / 4TH

    nett belt width 600 mm

    thermo oil heated

    teaserlink
  • Double jacket mixing tank
    Sold

    Double jacket mixing tank

    280L

    with mixer

    teaserlink
  • “Glass” Mixer 300 L.
    Sold

    “Glass” Mixer 300 L.

    tiltable drum

    1 speed

    teaserlink
  • Self-feed grinder “Wolfking” Type SFG 850/200
    Sold

    Self-feed grinder “Wolfking” Type SFG 850/200

    200 mm - head

    32,5 kW

    teaserlink
  • “Wolfking” twin shaft paddle mixer Type TSM 850L
    Sold

    “Wolfking” twin shaft paddle mixer Type TSM 850L

    mixer capacity: ± 1.150 L.

    loading: ± 850L

    teaserlink
  • “Marel” weight grader CheckBin grader
    Sold

    “Marel” weight grader CheckBin grader

    Weighing unit

    Grading unit

    teaserlink
  • “Baader” separator desinewing machine "Baader", type 697
    Sold

    “Baader” separator desinewing machine "Baader", type 697

    drum : 3 mm

    capacity up to 1000 kg / h

    teaserlink